TTK Links: Home Page | TTK Moodle | ÕIS
TTK/UAS Repository For Digital Teaching and Learning Resources

Süstasõitjate kuivülikonna tootearendus Nurme Production OÜ näitel

Aia, Manni; Kadastik, Egle (2017) Süstasõitjate kuivülikonna tootearendus Nurme Production OÜ näitel. [thesis] [en] Product Development of Kayaking Drysuit in Nurme Production Ltd..

[img]
Preview
PDF - Published Version
Download (10MB) | Preview
[img] PDF (lihtlitsents - bdoc) - Other
Download (76kB)
[img] PDF (lihtlitsents - bdoc) - Other
Download (76kB)

Abstract

Käesoleva diplomitöö eesmärgiks oli välja arendada Nurme Production OÜ idee kohaselt veekindel ja spetsiifilise otstarbega kombinesoon, mille valmistamisel on vajalik kasutada innovaatilist tehnoloogiat. Otsustati kavandada mere- ja matkasüstasõitjatele mõeldud kuivülikonnad. Kokku kavandati ja valmistati tehnilised joonised kuuele mudelile, kolm meeste ja kolm naiste mudelit. Tootearendust jätkati väljavalitud ühe meeste ja ühe naiste mudeliga. Arendamiseks valitud mudelitele koostati tehniline kirjeldus. Lõputöö koostamise käigus valmisid mudelid „Kaur“ ja „Kadi“. Mudelite põhimaterjaliks valiti Gore-Tex® kolmekihiline kangas, mille pealmine kiht on vastupidava veekindla töötlusega. Alumiseks kihiks on vooder. Keskmisel kihil on membraan lamineering. Sellise ehitusega kangas on hea hingavuse ning omab seejuures tuulekindlust ja vetthülgavust. Gore-Tex® materjalide õmblused töödeldakse spetsiaalse Gore-Seam® teibiga, mis tagab õmbluste veekindluse. Valitud mudelitele konstrueeriti keha-ja püksteosa ning varruka põhilõiked, millest tuletati moekohased lõiked. Kraede lõiked saadi mulaaži meetodil. Mudelite kapuutside lõigete valmistamiseks kasutati ettevõttes olemasolevat lõiget. Lekaalidele koostati tehniline paljundus: meestel suurustes S-XL ja naistel S-L. Mudelite valmistamise tehnoloogia on valitud vastavalt ettevõtte võimalustele. Mudelite „Kaur“ ja „Kadi“ valmistamisel kasutati automaat- ja laserjuurdelõikust. Suur osa tehnoloogilisest töötlemisest oli lisaks õmblemisele, detailide liimimine üksteise külge. Majanduslikus osas toodi välja kavandatud mudelite esialgne omahinna kujunemine lähtudes kasutatavate materjalide kulust ning eeldatavast õmblemise hinnast. Mudel „Kaur“ eeldatavaks esialgseks omahinnaks kujunes ligikaudu 209 €. Mudel „Kadi“ eeldatavaks esialgseks omahinnaks kujunes ligikaudu 186 €. Valminud esikmudeleid katsetasid profesionaalid. Tootearenduse, katsetuste ja hinnangute põhjal tehti järeldused, mida võiks järgneva etapina mudelitel parandada. Pritsmepõlleseelik tuleks lisada ka naiste mudelile. Väljavahetamist vajaks kapuutsi, mansettide ja sisemise krae materjalid. Kapuuts võiks olla luku või takjapaelga eemaldatav ning põlvetugevduste detailid võiks olla suuremad. Lõputöö koostamisel valmisid koos kirjaliku osaga mudelite „Kaur“ ja „Kadi“ esikmudelid.

Abstract [en]

The aim of this thesis was to develop, based on Nurme Production Ltd.’s idea, a waterproof overall with a specific function. Manufacturing it, an innovative technology had to be used. Decision was made to design dry-suits for kayakers. Altogether, designs and technical drawings were made for six models, three of which were for men and three for women. One men’s model and one women’s model were chosen for future product development. For the chosen models, technical descriptions were compiled. As the main material for the models, a Gore-Tex® three-layer fabric was chosen, the outer layer of it has a durable water repellent finish, the inner layer is lining and the middle layer consists of membrane laminate. A fabric with a design like this is breathable, but also wind- and water resistant. The seams of the Gore-Tex® garments are sealed with a specific Gore-Tex® tape, that ensures the water resistance of the seams. For the chosen models, body and trouser parts, but also sleeve patterns were constructed, from which modified patterns were derived. Collar patterns were obtained by the method of drapery. Patterns alraedy existing in the factory were used to make patterns for the hood. For the templates, technical grading was constructed: for men sizes S-XL, and for women sizes S-L. The technology behind making the models was chosen according to the possibilities in the factory. Automatic and lazer cutting was used for the making of „Kaur“ and „ Kadi“ models. In addition to sewing, glueing process was also used. The approximate price of the models was brought out, in the economical part, considering the materials used and the price of the sewing work. The expected net cost of the model “Kaur” is 209 € and model “Kadi” is 186 €. Proto samples were tested by the professional kayakers. Based on product development, tests and evaluations, decisions were made on what to change when making further production. It was found that paddling should be added ladies model also. The fabrics of the hood, cuffs and inner collar will need to change. The hood should be removeable with zipper or velcro and the knee reinforcements should be bigger. By the end of the thesis, proto samples “Kaur” and “Kadi” were completed along with the written part.

Item Type: thesis
Advisor: Teele Peets
Co-advisor: Margit Saarsoo
Subjects: Clothing and Textiles > Product Development
Divisions: Institute of Clothing and Textiles > Clothing Design and Technology
Depositing User: Egle Kadastik
Date Deposited: 09 Jun 2017 13:17
Last Modified: 09 Jun 2017 13:17
URI: http://eprints.tktk.ee/id/eprint/3082

Actions (login required)

View Item View Item