TTK Links: Home Page | TTK Moodle | ÕIS
TTK/UAS Repository For Digital Teaching and Learning Resources

Multifunktsionaalsed rõivad tervisesportlasele

Onohhova, Olga (2015) Multifunktsionaalsed rõivad tervisesportlasele. [thesis] [en] Multifunctional clothing for sports enthusiast .

[img] PDF - Published Version
Restricted to Registered users only

Download (3MB)
[img] PDF - Supplemental Material
Restricted to Registered users only

Download (376kB)

Abstract

Töös käsitleti multifunktsionaalset rahvaspordikomplekti valmimisprotsessi disainist paljunduseni. Komplekt koosneb poolliibuva siluetiga raglaanvarrukaga tuulejakist ja ümarate põlveõmblustega pükstest. Töö ideeks oli moe ja praktilisuse vahel tasakaalu leidmine. Komplekti disainimisel on mõeldud toote mugavusele ning esteetilisele poolele. Jakil on naiselikud ja pehmed jooned, igavesti stiilne must-valge värvigamma, valged kandid, õmblusvarude töötlemise kasutamine toote paremal pool muudavad toote atraktiivsemaks ja naiselikumaks; funktsionaalne kangas, tasku, mille sisse toote võib pakkida, äratõmmatav selja pikendusdetail, mille võib madaldada vajaduse järgi, hingamisavad kaenla all ja kõrvaklappide juhtme ava taskus muutuvad toote praktiliseks. Õmblusvarude toote paremale poole väljaviimine ja kandiga töötlemine on lihtõmblusest kallim aga annab tootele kindlad eelised: riide pahem pool näeb puhtam välja ning õmblusvarud saab väiksemaks teha, mis hoiab kangast kokku. Kuna selle töö puhul pidi autor komplekti disainima, oli suur rõhk pandud uurimustöö osale. Töö alguspunktiks oli turu-uuring, mis pidi aitama kaasa toote disaini protsessile. Sihtrühma tuvastamine on oluline etapp, mis aitab toote väljakujunemisele kaasa. Läbi oli viidud ka konkurenttoodete analüüs. Töö autor püüdis läbi konkurentide toodete analüüsimise luua enda tootele huvitavate elementide abil väärtust, et konkurentidest eristuda. Suur rõhk oli pandud ka materjalide valikule. Kuna tuulejope oma kõigi põhiomaduste poolest peab kaitsma kerge vihma ja tuule eest ja samas olema ka esteetilisest poolest ilus ning kehasõbralik, oli kanga valikul läbi viidud kolm põhi testi, mille põhjal toote põhikangas oli valitud: õhuläbilaskvuse test, rebenemiskindluse test ning veetõrjuvuse test. Põhikangaks sai valitud musta värvi polüester ripstop, kanga valik oli teostatud järgmiste kriteeriumite põhjal: välisilme, taktiilsus, õhuläbilaskvus, tugevus ja veekindlus. 65 Töös olid käsitletud mõlema toote lõikeid, põhilõike konstrueerimisest moekohaste lõigeteni. Jakk on poolliibuva siluettiga: lõige on tehtud nii palju liibuvaks, et toode näeks ilus ja naiselik välja ja samas piisavalt avar, et anda liikumiseks piisavat ruumi. Autor tegi komplekti mõlemale tootele lekaalid, koostas paljundusskeemi ja koostas tehnilise paljunduse. Kuna toote arendamine on püsiv ja pikkajaline protsess, näeb töö autor potentsiaali selle komplekti edasiseks arendamiseks: varruka anatoomiliseks muutmine parema liikuvuse saavutamiseks, tootele nähtavuse andmine helkurpaela abil ning lisataskute konstrueerimine. Kuna selle töö toode on tehtud kommertslikus värvigammas, on see sobilik erinevatele tegevustele ja omab elemente, mis teeb selle atraktiivsemaks ja aitab konkurenttoodetest eristuda, milles töö autor näeb komplektis potentsiaalset kasu.

Abstract [en]

Subject and the scope of the thesis titled “Multifunctional clothing for sports enthusiast” are to complete process of development of sports enthusiast’s outfit from design to grading and fully prepare the product for manufacturing. Outfit consists of semi-fitted jacket with raglan sleeves and of the pant with interesting looking knee cutlines. The idea of this work was to find a balance between fashion and performance. During design stage focus was on the comfort and the aesthetics of the garment. Jacket has soft and feminine lines; its black and white colour combination will always remain in fashion, white elastic bindings, which were used to finish the cutlines on the right side seam allowances of the garment ensure product looks interesting and feminine; functional fabric, pack-it pocket, adjustable panel on the lower back, which can be pulled out if needed, armpit ventilation and headphone eyelet in the pocket ensure practicality. Bringing seam allowances to the right side of the garment and finishing it with elastic binding is more expensive than regular seam but gives certain advantages: gives the garment a cleaner look from inside, seam allowances can be cut smaller, which allows to save the fabric cost and ensures better mini marker. Due to necessity of designing the product of this thesis, research was very important. The starting point of this work was market research that was supposed to support the process of design. Identification of the target group is a very important stage that helps to develop the product. Analysis of the competitors’ products was held as well. Through the competitors’ product research author of this thesis was trying to create additional value to the product by adding interesting elements to ensure the product stands out and differs from similar products on the market. Big emphasis was on the material research. Windbreaker from its most basic qualities has to protect from light rain and wind, at the same time it has to be attractive from the outlook and has to be skin friendly. Three fundamental fabric tests were run to choose the main fabric: air permeability test, tear 67 resistance test and water repellency test. Black ripstop quality was chosen as the main body fabric. The choice of the fabric was ensured by next criterions: outlook, tactile qualities, breathability, strength and water repellence. Thesis included the construction of basic patterns and modification of the pattern to make it correspond to design sketch. Jacket has semi-fitted silhouette: patterns are made as fitted as possible to ensure smooth feminine lines and relaxed enough to ensure enough room for movement. All the pattern pieces were graded and grading rules were created. The development process of the garment is time consuming and author of this work sees room for improvement and further development such as preshaping of the sleeve to achieve better movement, adding reflective tape to achieve better visibility and construction of additional pockets. As the developed products are created using commercial colours, is suitable for different activities and has interesting elements, that ensure the outfit differs from competitors’ products, author of this thesis sees great potential of this product to succeed on the market.

Item Type: thesis
Advisor: Margit Kuusk
Subjects: Clothing and Textiles > Design
Divisions: Institute of Clothing and Textiles > Clothing Design and Technology
Depositing User: Olga Onohhova
Date Deposited: 11 Jun 2015 06:09
Last Modified: 11 Jun 2015 06:09
URI: http://eprints.tktk.ee/id/eprint/1339

Actions (login required)

View Item View Item